Promotions

custom engineered retractable roof systems

Retractable Louvered Roofs

Introducing the Louvretec Retractable Roof.

This innovative stacking or retractable system uses new technology desgined, developed and extensively tested by Advanced Design Innovations (ADI) in Australia.

Now, in joint collaboration with ADI, Louvretec is pleased to announce that this next generation Retractable Roof is now available exclusively through the Australian & NZ Louvretec Dealer Network. Featured all the attributes of convential Opening Roofs, the Louvretec Retractable has the added advantage that tat the touch of a button it rotates to 90 degrees and reracts away, leaving clear open spaces above.

  • Uninterrupted sun in winter…
  • The stars above on a summers evening…
  • Wide open views anytime you want…
  • Shade and a cool breeze in summer…
  • Covered protection from wind and stormy weather…
  • Spoilt for choice – perfect!

Key Features

  • Blades open and rotate up to 135 degrees when used as an overhead opening roof system
  • Retract Roof: Roof blades stacks neatly away leaving approximately 75% open space to enjoy the sky above
  • Extend Back: Bring the roof blades back in place when shelter is required
  • Louvretec also has a Retractable Sun Louvre system where the louvres retract back when not required.

Louvretec’s Retractable Opening Roof provides the features of an original opening roof with the added ability to retract the louvres back allowing users to enjoy the sky above, and then extend the louvres back in to place to create a comfortable haven.

Louvretec now offers a range of three distinctive Retract Roof systems

  1. 220 Original Retract Roof
  2. 220/40 Slimline Retract Roof
  3. 220/30 Slimline Retract Roof

Each roof can function in an Opening Roof mode with blades rotating open and close from 0˚ to 135˚ with louvre blades being able to be stopped at any point during this tilt process. At a touch of the Retract Button the louvre blades automatically tilt to 90˚ and start retracting back. Stacking from front to back all at one end or from the middle out with half the louvre blades at either end. This functionality coupled with either a 3 Sided Frame or 4 Sided Frame enables five different roof and frame configurations for selection. Please refer to following pages for detailed options. For ease of calculating exact sizes, all louvre blade widths and pivot centres are the same – one equation method covers all. Before deciding which Retract Roof option best suits your project please refer to Section 4 ‘Engineering Reports’ which outlines spans within various wind zones.

We invite you to explore the options. Revolutionise your outdoor – indoor space with a Louvretec Retract system.


 

 

1. AS AN OPENING ROOF
1. AS AN OPENING ROOF
2. BLADES STACKED TO ONE END
2. BLADES STACKED TO ONE END
3. BLADES STACKED HALF TO EACH END
3. BLADES STACKED HALF TO EACH END
1. 220 ORIGINAL RETRACT ROOF
  • Blades stack to rear
2. FOUR SIDED FRAME – STACK TO ONE END
  • Blades stack to one end
3. FOUR SIDED FRAME – STACK EACH END
  • Blades split stack from centre to each end
  • Must be even number of blades
4. FOUR SIDED FRAME – MEET IN MIDDLE (MIM)
  • Two separate roofs, configured to make one
  • Blades split stack from centre to each end
  • Can be even or uneven number of blades
  • Allows for large openings up to 12m
5. FITTING OVER EXISTING OPENING
  • Blades can stack all to one end or split stack from centre
6. FITTING OVER EXISTING OPENING – CLEAR VIEW (CV)
  • Blades can stack all to one end or split stack from centre
  • CV frames extend so blades retract beyond opening leaving an open, clear space

Book Your FREE Estimate

Email Us
Request a free quote
Request a free quote